HVA Ceramic Resistors

㈠Introduction:

   Ⅰ KKT’s HVA Resistor series are primarily designed for high voltage,high energy and high current products.
   Ⅱ HVA’s function is much better than carbon composition resistor, in some fileds, several carbon composition resistors can be replaced by only one ceramic resistor.
   Ⅲ Operating ambient temperature:-55℃~200℃.
   Ⅳ Resistance value:3Ω~2MΩ.
   Ⅴ Tolerance:K(±10%),M(±20%) are recommended, F(±1%),G(±2%),J(±5%) are available.
   Ⅵ For customerized products please contact with us.

㈡Features： 

  Ⅰ Special ceramic resistor , was made of Clay , Silicon dioxide and Porcelain cement ,After sintering under high temperature and high voltage , the resistor core was build ,then take the insulation coating.
  Ⅱ Saver than the wire-wound resistor and film resistor , which will avoid the wire disconnecting and the film breaking up .
  Ⅲ High peak power can be reached at 5KW-30KW in short time.
  Ⅳ Good performance in bearing high voltage and high current.
  Ⅴ Products meet the RoHS requirments.

㈢Applications:

 Ⅰ Rad ㈠Introduction:

   Ⅰ KKT’s HVA Resistor series are primarily designed for high voltage,high energy and high current products.
   Ⅱ HVA’s function is much better than carbon composition resistor, in some fileds,several carbon composition resistors can be replaced by only one ceramic resistor.
   Ⅲ Operating ambient temperature:-55℃~200℃.
   Ⅳ Resistance value:3Ω~2MΩ.
   Ⅴ Tolerance:K(±10%),M(±20%) are recommended, F(±1%),G(±2%),J(±5%) are available.
   Ⅵ For customerized products please contact with us. 

㈣Constructions：

    
㈤Power Rating:
  HVA 0.5W、1.0W、2.0W 
㈥Tolerance::
  F=±1%、G=±2%,J=±5%、K=±10%
㈦Resistance Range:
  K:±10%E12:4.7Ω-2MΩ       M:±20%E6:4.7Ω-2MΩ 
㈧T.C.R:(X10-6/K）
 -800±300:R＜100Ω-1200±300:R≥100Ω